TECHNICAL TEAM
We develop designs intended to satisfy our customers' requirements in every way, through ongoing dialogue and comprehensive involvement on their part in every step of the design process: from conceiving the idea, studying designs, production processes, quality control, despatch and installation. At every step, and also once the work is complete, we provide our specialist technical support.
SINGLE BLADE BLOCK CUTTING
The single blade cutting machine is used to cut blocks into slabs and sheets of various thickness
SLAB CUTTING
The slab is first studied in order to allow the customer to choose and select the particular shades and vein patterns they wish to retain in the finished product, and it is then cut to requirements.
WATER JET CUTTING
To achieve elaborate inlays and undercut detailing on marble, quartz, ceramics and metals.
CHOICE OF PUTTY
The putty is prepared on the spot so that its colour matches the material to be treated.
SURFACE FINISH
After any calibration, the surface is finished according to various styling requirements: matt grinding, brushing, bushhammering, sandblasting or mirror polishing.
GROUTING
Cement-based grouting is prepared according to the material processed and then applied onto the product in order to even out the surface and enhance its aesthetic beauty.
FINAL PRE-INSTALLATION
The pre-installation process which follows the labelling process is carried out to check that the latter was done correctly and to make sure there is proper continuity and correspondence of shade and vein patterns in the material. This way, the subsequent final installation is made easier still.
ADMINISTRATION DEPARTMENT
Once production is complete, the administration department draws up and prepares the despatch documentation.
CHOICE OF MATERIAL
Based on the customers' requirements, we recommend the best materials for each individual project, assisting them in their choice between marble, granite, onyx, travertine, technical materials or ceramics. This way, we can offer a complete consultancy, to guarantee the best functional and structural solutions for the overall design planning.
SHAPING
Based on the design prepared by our engineering department, we obtain the shape outlined during the design process from the initial solid block.
DIAMOND-WIRE CUTTING
Designed to perform curved cuts based on elaborate profiles, thereby allowing greater flexibility in satisfying the customers' requirements.
INITIAL PRE-INSTALLATION
The product is pre-installed to check continuity and correspondence in the colour and vein patterns of the material.
FILLING WITH PUTTY
After the part has been cleaned with a metal wire brush, a thin layer of putty is applied onto the material, filling any holes and levelling the surface, preparing it for subsequent processing.
EDGE FINISH
The part produced by the machinery, which is still unfinished, is finished using specific tools and instruments (sand paper, diamond discs and abrasive wheels), depending on the type of processing applied and on the level of grinding required. The grinding process may then be followed by a matt grinding and/or mirror polishing process, depending on specific requirements.
LABELLING
Each individual element is labelled in sequence, making the layer's job easier on the one hand and on the other ensuring continuity of shade and vein patterns according to the design prepared.
PACKAGING
All the products are arranged in sturdy wooden crates according to a packing list prepared to match the on-site installation sequence. Specific precautions are taken to ensure the material remains intact until it reaches the site.